Sunday, May 25, 2014

Nearly there!

I got right back to work on the kiln as soon as I arrived home from Minnesota.  I'm just about finished but I have a small punch list to knock out.  I still need to cast salt troughs for the firebox and set the bagwalls, set up the burners, and build some storage for the kiln shelves and posts.  

I put up a metal roof for the shed and flashed around the chimney.

This is the door frame and the I-beam trolley system.  The beam is about 12' long and extends out the side of the shed.



The oil burners require a much smaller and tapered port.  I found these plastic funnels that were just the right size.  I built a little frame and cast them using Mizzou castable.  They should work just fine.

Here is the 99% finished kiln.  The door is constructed of high alumina soft brick, this is the same brick I used on both of my previous wood kilns and it held up pretty well.  I coated the kiln side of the brick with a thinned down mix of AP Green #36 high alumina cement.  I wanted to use greenpatch 421, which is fairly common amongst potters.  My supplier was out of that and recommended the #36 as it has a higher amount of alumina, about 70%.  I did discover that it will not bond if there is any dust on the brick, which is a tall order for soft brick, but I think I made it work.  Time will tell if that coating makes a difference.  The door track works great, I can move the 700# door with one hand quite easily.  I'm excited about it!

I mixed clay several days ago and it should come out of the racks in a week or so and then it's on to making pots!

Cheers!

1 comment:

Sandy Miller said...

Really excited to see this fire....... contemplating a bourry box kiln but love this idea! Feels like I'm on standby.....