Saturday, April 10, 2010

bummer.

There are times when you just can't think of everything. Now, how to get this out without destroying the form? Hmmmm.........

15 comments:

FetishGhost said...

It's not so funny... but I'm still kind of chuckling... sorry, I don't have any thoughts.

Tracey Broome said...

Hmmmm...... didn't you offer to come build me a kiln :)
Looks like something I would do!

ang said...

hehehee it's going to have to be the saw...that or the pole goes!

Mr. Young's Art said...

Take the pole out and weld it back in after????

Sue Pariseau Pottery said...

My husband once built a dining table in his basement workshop. Very nice table, but it didn't fit up with stairs.

cindy shake said...

Looks like I need to fly down there with my plasma cutter and welder... :o)

rwhendrix said...

I feel your pain man. Done stuff like that myself before also. Guess you will have to tear apart the form.
I once put a rebuilt transmission back into a car only to look over and see the crankshaft flywheel still setting on the workbench. So I had to tear it all back out again. lol uhggg.

Lloyd said...

I don't know but I sure hope I see it on http://thereifixedit.com

createniks said...

Circular saw as close to the brick work as you can. Slide some more of the form out and cut again. Use some masonite or flexible plywood screws and liquid nails to reassemble your form from the inside.

createniks said...

Oh it forgot to add.

Doh!

Liz said...

oh man. That totally sucks. I would take ou the post, and weld it back in place later.

MattyT said...

you could burn the form to get it out.

cookingwithgas said...

we're not laughing at you..... but with you!
Does the pole have a purpose?
If not.......

createniks said...

CWG it looks like it's holding up the roof.
You could also use a couple 2x4s to brace the roof and unbolt the pole if you were lucky enough for it to be bolted down. Otherwise sawzall and weld.

Scott K Roberts said...

anyone who can build a treadle wheel can figure that out