firing IV knocked out of the park.

I figure since Kline has abandoned the roman numerals I'll pick them up for awhile...though I probably won't be putting them on my pots anytime soon.

Cone 10 down...I extended this firing out to 7 hours, up from 6 the previous firing. I'm planning on doing a "glaze" firing in the next load so I spent some time playing with the passive damper trying to slow down the firing at the end. I've never really used it other than to help even out the kiln if it needed it.


Here is the wood that is left over...this is a pretty efficient kiln. And I didn't even have to use much of the f-up lumber(as I like to call it.)


Well, now it's 45 hours of waiting to see if I've been blessed or cursed. My next post will be #250 so I think I'll save that for the unloading.

Now I'm going to go dig a chunk of wood(not a splinter) out of my finger...that's the price of woodfiring. I don't mind, the pots are worth it. Maybe I should wear gloves....oh yeah.

Cheers!

ready to go.

The kilns all ready to go...I'll start first thing in the morning.

Here is the firebox length wood...with a goat on top. I need to remember to shut the door behind me when I go to the barn. That shorter stack on the left is 1/2 - 3/4 length for stoking if the kiln is uneven. This wood goes into the kiln above the grates once it hits red heat...12-1300 degrees.


These short blocks are 10-15" and are split into smaller pieces while the kiln is firing. They are used for the beginning all the way up to about 1200 degrees and are stoked below the grates to keep the flame from touching the pieces before red heat. The first half of the firing is fairly boring when you are by yourself so I keep a stack of wood to chop to keep myself occupied. I have a chopped stack ready to go so that I don't ever get short on wood.


The kiln has been walking a bit...about 3/4" so far. I was able to put clamps on the kiln and move it back about 1/4". I've heard that sometimes these kilns walk out and then walk back in, but that doesn't seem to be happening here. The kiln isn't an arch all the way to the ground...the firebox is a vertical wall about 3' tall with the arch on top of that and no bracing, so I should probably fix that.


I haven't fired in about 6 months so I thought I would start a small fire to be safe in case there is any moisture. I took it up to 250 degrees in about an hour and then clammed it up when the temp started to fall. It should be just over 100 when I go out in the morning and then I'll let her rip.


I'll let you know how it goes.

Cheers!

loaded.

I finished loading the kiln last night at about 9pm.

Here are the pots that made it in. There were also 2 large platters, 2 medium platter/bowls and a dozen taller pieces...all of these pots but 2 made it in the kiln, I think it was 185 pieces in all.

I ran out of room in the barn so I had to keep some outside.

The kiln cleaned out and ready to start loading. I stack the back 2 sets of 12x24's and the 10x20's by the flu first. When those are done I do one more 12x24 stack in the front.

I glue the wads onto all the pieces as I load them. I used to wad them and then carry them out to the kiln but it's about 100 yards and they don't always balance well on boards with the wads already on. The glue keeps them in place in case I want to pick a piece up and move it, otherwise the wads fall off.

How I stack plates. I like to stack the plates high so the weight warps them and gives the rim a little wobble.

3/4 done...all that's left is the front stack of shelves.

Finished...9 hours later.

Hopefully firing on Wednesday...though maybe not until Friday. I have a lot going on at school this week and may not be able to get away.

Cheers!

pots and goats.

Loading the kiln, it's about halfway there. I'm also having to fend off the goats and keep them from knocking over the 200 or so pots that are laying around. They like to climb on things and play king of the hill....like my wood piles.


More later.

Cheers!

back to work.

I'm still here working like a dog. I've been glazing pots this evening and hopefully will finish glazing and decorating tomorrow and if the gods are kind I will begin loading the kiln tomorrow night.

The Elmer Taylor workshop went well...in the afternoon we had about 40 people, standing room only. A nice problem to have sometimes. In true workshop fashion he didn't make too many pots but told lots of stories...along with many of his teaching/educational stories. Very entertaining.

Some of his pots. He decorates with slip immediately after it's thrown and while it's still attached to the wheel. He's very fast and very spontaneous. I've never much cared for Elmer's pots...not that they're bad, they just don't speak to me. But as I've gotten to know him better this last year they've started to grow on me. I certainly enjoy his personality, he speaks his mind, has solid opinions and can be a bit crass at times. I enjoy that.


A personal favorite.


Organizing a workshop sure is a lot more work that I thought...I'm pretty tired, think I'll hit the sack.

Well...I'll leave it at that. More to come as I load the kiln.

Cheers.

it smells like goat in here.

We have a couple of new family members. Lee(white) and Harvey(black) have become our new resident weed eaters. They like to sleep and lounge in my kiln...while that is kind of adorable I fear that it's not too safe. We'll see how this pans out.


Cheers!

procrastinating.

I came up to the studio today just to put these little handles on the covered jars pictured below. I'm supposed to be chopping wood for the upcoming firing but sitting around on a saturday listening to wait, wait... and cartalk on npr sounded much more enticing. To further the procrastination I decided to post some photos of some recently finished pots.

Detail of handle on jar...I really like fat handles.

Some small condiment bowls, or "guinomi" of you're a pottery elitist ;)


Some large casseroles.

Slip decoration as a base for further decoration later.

Mixing bowl, this was a new idea that was moderately successful.

Well...back to work.

Cheers!